0
Description
Made specifically for mono recordings on vinyl records,the cartridge only generates signal with horizontal movement. However to produce a minimal wear on the groove,the AT-MONO3/LP also has an adapted vertical compliance.
- Carefully selected component and state of the art technology produce a high resolution cartridge.
- Straight pipe aluminium cantilever and low mass stylus guarantees a high tracking ability.
- The average usage time is 500 hours extending the life span of precious mono recording.
- High purity PCOCC allows a more transparent signal transmission offering a high efficiency and a high fidelity.
- To support the internal mechanism,the body is made of solid die-cast aluminium alloy,furthermore stiffness is achieved with the addition of rigid synthetic resin to hold the body.
- This model is not compatible with 78rpm SP records
Specifications
| Type | Moving Coil |
| Frequency Response | 20 to 20,000 Hz |
| Coil Impedance | 40 W (1 kHz) |
| DC Resistance | 40 W |
| Vertical Tracking Angle | 23 degrees |
| Recommended Load Impedance | 400 W to 47,000 W |
| Coil Inductance | 190 mH (1 kHz) |
| Static Compliance | 20 x 10 – 6 cm / dyne |
| Dynamic Compliance | 7 x 10 – 6 cm / dyne (100 Hz) |
| Output Voltage | 1.2 mV (at 1 kHz,5.0 cm/sec) |
| stylus Shape | Conical |
| Cantilever | Aluminium Pipe |
| stylus Construction | 0.6 mil |
| Mount | 1/2” centers |
| Dimensions | 16.0 (H) x 16.6 (W) x 26.5 (L) mm |
| Weight | 6.8 g |
| Accessories | Non magnetic screw driver; 1 brush; 2 washers; 2 x 19 mm mounting screws; 2 x 13 mm mounting screws; 2 x nuts; 1 plastic protector; 1 set of PCOCC lead wires AT6101 |
